Featured post

Adaptive Traffic Signal Control | New Way To Reduce Traffic

1. Introduction Urban areas are increasingly grappling with the problem of traffic congestion, which not only leads to longer travel times but also results in excessive fuel consumption and harmful emissions. With cities growing in both size and population, efficient traffic management has become a priority for city planners. One of the most promising solutions to address this challenge is Adaptive Traffic Signal Control (ATSC). By adjusting traffic light timings based on real-time data, ATSC significantly reduces delays and improves traffic flow, thus offering a smarter way to manage urban mobility. 2. What is Adaptive Traffic Signal Control? Adaptive Traffic Signal Control (ATSC) is an advanced traffic management system designed to optimize traffic light timings in response to real-time traffic conditions. Unlike traditional systems that operate based on fixed schedules, ATSC uses real-time data to dynamically adjust traffic signals. This results in fewer traffic jams, smoother vehic
0

Solution of any singly RCC beam from excel sheet


THIS BLOG IS WHERE YOU CAN GET SOLUTIONS OF SINGLY RCC BEAM, AND PROBABLY DESIGN ANY SINGLY BEAM WITH VARIOUS FLEXIBILITY AND POSSIBILITIES. THE CONTENT IS CREATED ORIGINALLY BY AUTHOR. SO CONTENT MIGHT SUBJECTED TO COPYRIGHT IF ANY MISUSE IS ENCOUNTERED OF THIS CONTENT.
    

    

 

Solution of any singly RCC beam from excel sheet


Civil works and solutions original blog









A future civil engineer.

FIRST OF ALL, HOW TO START?

So this is so simple to use and analyze, the tricky part is to design, because various design aspect is considered with parallel calculations. So finding which one is your answer might find a tricky one to you at first. But don’t worry that’s why this guide manual is given to use it.
The content and design concept is of limit state method as given in IS:456-2000.
So, refer that code for more detailed understanding of this topic.

TO ANALYZE THE SINGLY BEAM

SCREENSHOT REPRESENTATION OF SOLUTION SPREADSHEET OF SINGLY RC BEAM

 

Data required.

The basic data required of beam to solve and analyze beam is as follows.
1.    Width of beam b mm.
2.    Effective depth of beam d in mm.
3.    Grade of concrete fck N/mm2.
4.    Grade of steel used as tension reinforcement fy N/mm2.
     Only works with fy 250,415 & 500 N/mm2.
5.    Diameter of bar used as tension reinforcement mm.
6.    No of bars used as tension reinforcement.
This data is required to find out moment of resistance the beam can carry. But to calculate safe load which that beam can carry, some extra positions data required. As follows.
7.    Length of beam m.
8.    Effective cover in mm.
That’s it, and here you are ready to find solution of any desired rcc singly beam by providing above mentioned data.

Getting familiar with excel sheet.

            The separate table is providing you information of analysis, that analysis table is all you have to see, and the table is formatted to make is easy to understand. All labels of column representing respective property of beam is stated clearly and readable as well. So go through the headings of each column and also the units in which that column is to be provided in data is mentioned. So make sure to read them all first.
Then the table is formatted to make it as easy as possible to use it quickly. The table headings are given some color codes to separate them with the required terms and the calculated answers terms. Which are stated as follows.

☐The required data to get solutions.

☐the fields calculated form given data.

☐the final answer which you want to get solution of beam.

The color of shape represents color of header bar of table and label given right to them represents field of data which columns with having header color represents.
Now you understand the color code of table you are ready to analyze the beam.

Steps to analyze beam using spread sheet.

·         First provide the required data set mentioned above and check the units mentioned in header to remove error.
·         Then provide grade of concrete and grade of steel, because based on that the all calculations are based and related.
·         See the color code given above and fill all the boxes in same row having color this.
·         Then note down all data calculated form the given data having color this.
·         Then the final answer of analysis which is either the moment of resistance in N/mm2 or KN/m2, or the safe load the beam can carry without any problem is given in color this.

There you go note down all the answers calculated form sheet in same row, but remember this sheet is created to check the answers only so for that purpose you can set up solutions of 10 beams at once.
After that you have to rewrite all the data to get further solutions.

The link to download the excel sheet to analyze the singly RC beam is given below.

CLICK HERE TO GET EXCEL SHEET TO SOLVE SINGLY RC BEAM




Don’t misuse it, and keep in mind that, no matter how much an artificial computer in genius, the more genius is only the creator of it not the user of it. So solve the examples by yourself and then check whether the answers are right of wrong by this sheet given below.
The design of beam will be uploaded soon. So stay tuned, follow this blog for more future solutions of problems like this.
Believe me, the best is yet to come.











This content is created by me only, and if this content is harming you by any means, then I humbly apologize for that.


Comments

Post a Comment